Skip to content
Robotlar

DeepRobotics X30

Industrial Quadruped Inspection Robot

Payload
≥20 kg
Load Capacity
Speed
4 m/s and above
Max Speed
Runtime
2.5-4 hours
Per Charge
Protection
IP67
IP Rating

The DEEP Robotics X30 is the flagship quadruped built for inspection, investigation, security, surveying and mapping.

Read more

Dimensions 1000 x 695 x 470 mm (X30) / 1000 x 715 x 470 mm (X30 Pro); Weight 56 kg (X30, battery included) / 59 kg (X30 Pro); Speed 4 m/s and above; Protection IP67; Operating temperature -20°C ~ 55°C; Runtime 2.5-4 hours; Range 10 km and above; Mobility Quadruped; climbs and descends stairs up to 45 degrees, clears obstacles of 20 cm and above.

Enterprise supply · specification support · integration engineering

Overview

The DEEP Robotics X30 is the flagship quadruped built for inspection, investigation, security, surveying and mapping. We deliver DeepRobotics hardware to corporate projects through enterprise supply, commissioning and engineering support. Investment is set by corporate quotation against configuration, quantity and delivery terms.

The published figures are: Dimensions 1000 x 695 x 470 mm (X30) / 1000 x 715 x 470 mm (X30 Pro); Weight 56 kg (X30, battery included) / 59 kg (X30 Pro); Speed 4 m/s and above; Protection IP67; Operating temperature -20°C ~ 55°C; Runtime 2.5-4 hours; Range 10 km and above; Mobility Quadruped; climbs and descends stairs up to 45 degrees, clears obstacles of 20 cm and above.

Sources and Limits: the technical values come from the manufacturer's own product page (https://www.deeprobotics.cn/en/index/product3.html). Headings absent from that table are not written here either.

3 use cases

The DeepRobotics X30 in motion

Tap the cover to play; sound and loading start only on click.

DeepRobotics X30 product video

Use Cases

The use cases the manufacturer defines for the DeepRobotics X30.

  1. Security and patrol
  2. Field inspection
  3. Construction site

Key Advantages

Stairs at 45 degrees

The X30 climbs and descends industrial stairs at a 45 degree angle.

  • On an inspection route a staircase is a break point; because the robot does not stop here, the round time stays predictable.

Navigation without light

The integrated perception array navigates autonomously in darkness, strong light and flickering light, even with no light source at all.

  • Tunnel, basement and night patrols therefore need no separate lighting infrastructure.

Fast battery swap

The manufacturer reports that endurance is up 25 percent over the previous generation, and the battery can be swapped quickly.

  • On an urgent task the robot does not wait to charge; the battery is changed and the round continues.

IP67 and a wide temperature range

An IP67 protection rating and an operating range of -20 to 55 degrees Celsius make it possible to cover two extreme conditions, a rainy site and a cold warehouse, with the same machine.

The DeepRobotics X30 up close

4 images; tap to enlarge.

Technical Specifications

15 values in 7 categories; data published by the manufacturer.

General structure
Mobility form
Quadruped; climbs and descends stairs up to 45 degrees, clears obstacles of 20 cm and above
Size and weight
Dimensions (standing)
1000 x 695 x 470 mm (X30) / 1000 x 715 x 470 mm (X30 Pro)
Weight
56 kg (X30, battery included) / 59 kg (X30 Pro)
Motion and performance
Payload
≥20 kg
Maximum speed
4 m/s and above
Climb angle
≤45°
Obstacle and step
≥20 cm
Power and runtime
Runtime
2.5-4 hours
Range
10 km and above
Sensors and connectivity
Sensors
Integrated perception array: autonomous navigation in darkness, strong light, flickering light and no-light environments
Connectivity
Ethernet; 72 V battery power output (X30). The X30 Pro additionally provides USB 2.0, USB 3.0, Ethernet, Wi-Fi and 5 V / 12 V / 24 V power output
Software and development
Processor
Integrated perception and motion control platform
Software features
Intelligent stair climbing, intelligent autonomous charging, obstacle avoidance. The X30 Pro additionally carries sensor fusion and calibration algorithms, multi-sensor fusion mapping and positioning, navigation and route planning, an industrial power interface (flexible 12 V / 24 V support) and an intelligent lighting system.
Environmental resilience
Ingress protection
IP67
Operating temperature
-20°C ~ 55°C

Sources and documents

Verified on the manufacturer page on 18 September 2026.

An itemised quote for the DeepRobotics X30 is prepared by configuration, quantity and delivery scope.

Purchasing support

Get a quote for the X30

Robotic system costs are optimised according to the selected hardware platform, additional sensor and payload configurations, and the integration scenarios specific to your site. Share your requirements and our engineering team will prepare a feasibility report and a pro forma quotation tailored to your organisation.

  • Supply and delivery scheduling backed directly by the manufacturer
  • Site- and mission-focused technical feasibility and simulation
  • Turnkey hardware, software and mission integration
  • Advisory on corporate tenders, specifications and administrative processes

Direct contact and advisory line: 0850 532 6 777

Add project details (optional)

Product of interest: DeepRobotics X30

X30: Frequently Asked Questions

The most common questions about the DeepRobotics X30.

What is the difference between the X30 and the X30 Pro?

The body height and motion performance of the two models are the same. The difference is in connectivity and weight: the X30 Pro is 715 mm deep and weighs 59 kg, and also provides USB 2.0, USB 3.0, Ethernet, Wi-Fi and 5 V, 12 V and 24 V power output. The standard X30 weighs 56 kg and offers Ethernet and a 72 V battery output. If you will connect extra sensors or a computer, choose the Pro; for a plain inspection round the standard version is enough.

How many hours does it run?

The manufacturer reports 2.5-4 hours of operation and a range of over 10 km. Because the battery can be swapped quickly, in practice the number of batteries determines the round time.