22 kg body, 12 kg payload
The 22 kg body carries 12 kg in continuous walking.
- That ratio is enough to carry a sensor tower and a small computing module together in the compact class.
GALILEO C1
Compact Industrial Quadruped Robot
- Payload
- 12 kg
- Continuous load
- Endurance
- 3-5 h
- Per charge
- Steps
- 20 cm and above
- Consecutive steps
- Protection
- IP67
- Joint IP rating
The GALILEO C1 is a compact-class quadruped inspection platform for narrow corridors and indoor work. The 22 kg body can be carried by one person and takes a 12 kg payload in continuous walking.
Read moreShow less
IP67-rated joints and a -20°C to 55°C operating range let it work outside enclosed facilities as well. Autonomous charging and a low-power mode beyond 365 days let it wait at the dock between missions.
Enterprise supply · specification support · integration engineering
Overview
The GALILEO C1 is a compact-class quadruped inspection platform for narrow corridors and indoor work. We supply GALILEO hardware to corporate projects with enterprise supply, commissioning and engineering support. The investment figure is set by corporate quotation according to configuration, quantity and delivery terms.
The 22 kg body can be carried by one person and takes a 12 kg payload in continuous walking. IP67-rated joints and a -20°C to 55°C operating range let it work outside enclosed facilities as well. Autonomous charging and a low-power mode beyond 365 days let it wait at the dock between missions.
Inspection work demands continuity: the robot stays in the field for 3-5 hours and then charges itself. Secondary development is open, so you can add your own sensor and software layer in areas such as water utilities, energy, security and rail transit.
3 use casesThe GALILEO C1 in motion
Tap the cover to play; sound and loading start only on click.
Which C1 fits your needs?
The manufacturer's official variant matrix; the values are documented data.
| Feature | C1 | C1-W |
|---|---|---|
| Standing dimensions (L x W x H) | 765 x 410 x 475 mm | 765 x 480 x 540 mm |
| Weight | 22 kg | 28,5 kg |
| Movement speed | 0-3 m/s (adjustable) | 0-5 m/s (adjustable) |
| Stair walking capability | Continuous step of 20 cm and above | Continuous step of 20 cm and above |
| Maximum climbable slope | 30 degrees and above | 30 degrees and above |
| Endurance time | 3-5 hours | 3-5 hours |
| Continuous load | 12 kg | 12 kg |
| Joint IP rating | IP67 (joint) | IP67 (joint) |
| Quote | Get a Quote for This ModelC1 | Get a Quote for This ModelC1-W |
In the manufacturer's comparison table the two versions carry identical values for battery (48 V 20 Ah, 960 Wh), processor, Wi-Fi 6, autonomous charging, low-power mode and operating temperature; the headings that differ are dimensions, weight and movement speed.
Use Cases
The use cases the manufacturer defines for the GALILEO C1.
- Field inspection
- Security and patrol
- Education and research
Key Advantages
Autonomous charging and 365 days of standby
When a mission ends the robot returns to its own station.
- Standby of more than 365 days in low-power mode, together with remote wake-up, makes seasonal inspection programs possible.
IP67 joints, -20°C to 55°C
The joints are IP67 protected and the body operates between -20°C and 55°C.
- This range takes the robot out of the enclosed facility and into open-field inspection.
The GALILEO C1 up close
4 images; tap to enlarge.
Technical Specifications
14 values in 5 categories; data published by the manufacturer.
Size and weight
- Dimensions (standing)
- 765 x 410 x 475 mm (length x width x height)
- Weight
- 22 kg
Motion and performance
- Walking payload
- 12 (continuous walking)
- Maximum speed
- 0-3 m/s (adjustable)
- Climb angle
- ≥30°
- Obstacle and step
- ≥20 cm consecutive steps
Power and runtime
- Battery capacity
- 960 Wh
- Battery
- 48 V 20 Ah (960 Wh); autonomous charging supported
- Battery voltage
- 48 V
- Runtime
- 3-5 h
Software and development
- Processor
- ARM-based low-power processor (8 cores, 8 threads, 8 GB RAM, 64 GB SSD)
- Software features
- Secondary development supported; Wi-Fi 6 dual-band; low-power mode with remote wake-up (≥365 days)
Environmental resilience
- Ingress protection
- IP67 (joint)
- Operating temperature
- -20°C to 55°C
Sources and documents
Verified on the manufacturer page on 18 September 2026.
An itemised quote for the GALILEO C1 is prepared by configuration, quantity and delivery scope.
Purchasing support
Supply model
Supply to Turkey is planned per project; import, delivery and commissioning scope are itemised in the quote.
Pre-sales assessment
Site and mission focused technical feasibility; specification and administrative process support.
- Continue
Demo and site visit request
Send a demo request; availability and scope are settled in the call.
- Continue
Source documents
Technical values come from the manufacturer's documents; verified on 18 September 2026. 0 documents at the bottom of the page.
Get a quote for the C1
Robotic system costs are optimised according to the selected hardware platform, additional sensor and payload configurations, and the integration scenarios specific to your site. Share your requirements and our engineering team will prepare a feasibility report and a pro forma quotation tailored to your organisation.
- Supply and delivery scheduling backed directly by the manufacturer
- Site- and mission-focused technical feasibility and simulation
- Turnkey hardware, software and mission integration
- Advisory on corporate tenders, specifications and administrative processes
Direct contact and advisory line: 0850 532 6 777
C1: Frequently Asked Questions
The most common questions about the GALILEO C1.
How much payload does the C1 carry?
12 kg in continuous walking. That is enough to carry a sensor tower and a small computing module together; for heavy manipulation, look at the E1 or S1 body.
Does it work outdoors?
The joints are IP67 protected and the operating range is -20°C to 55°C. Open-field inspection in rain and dust is within scope.
Can I run my own software?
Secondary development is supported. The body has an 8-core ARM processor, 8 GB RAM and a 64 GB SSD; the external interfaces are Ethernet, USB and RS485.
